My Favourite Unit Conversion Program

  • Share
  • Share

There are lots of ways to solve unit conversion problems, but I thought I would share my favourite little program. Convert for windows. It’s simple, it’s free, it’s a tiny little tool, it has a good range of unit types covered. It’ll take you 1 minute to try it.

Another good option online, when you have a really involved conversion problem, is Wolfram Alpha. I just did a search on “32 lb/ft3 in kg/m3” and it solved it in one step. Nice.

Print Friendly, PDF & Email
Share

About admin

I own and run smartprocessdesign.com
This entry was posted in General Engineering Topics, General Office and tagged , , . Bookmark the permalink.

2 Responses to My Favourite Unit Conversion Program

  1. Greg James says:

    I’ve been using “Master Converter” (http://www.savardsoftware.com/masterconverter/) for years myself which is also a nice piece of software. You can configure more conversions yourself, and it takes care of those pesky and error-prone ‘absolute’ to ‘gauge’ pressure conversion problems!

  2. Pingback: Convert Units Easily with Factor-Label Unit Conversion | Smart Process Design

Leave a Reply to Greg James Cancel reply

Your email address will not be published.

61 + = 70